The Powder Toy

Photon Laser with C.L

  • mirek123     21st Aug 2011 Member 0 Permalink
    This is the laser with cooling liquid. If the laser will warm up too much it will change color.
    Laser heats up when it hits the material is indestructible (DMND, INSL, COAL)
    Overheating will cause damage the laser

    SING destroy and overheated the laser (put it on the ray of laser)
  • code1949     21st Aug 2011 Member 0 Permalink
  • Klotzstein     21st Aug 2011 Member 0 Permalink
    Coal and Insulator are destructible , by many things including pressure (for coal).
    Insulator can melt
  • CAC-Boomerang     21st Aug 2011 Member 0 Permalink
    @Klotzstein (View Post)

    they're indestructable to a laser, as COAL does not ignite via high temperature. INSL also does not conduct heat giving it an immunity.

    This also applies to GOO.
  • mirek123     21st Aug 2011 Member 0 Permalink
    @mirek123 (View Post)
    I know . The other explosive materials (c-4) can overheated this laser but a after several seconds everything is ok ;)

    So I wonder how many kb weighs an average project
  • Tellet     21st Aug 2011 Member 0 Permalink
    But, what's the point of cooling in this laser? First, you heat the photons, and then, you want to cool them down? And why you've put the GPMB? When i start the laser it breaks:
    http://img716.imageshack.us/img716/9891/zzzsvp.jpg
You need to login before you can post replies