@wisco11 (View Post) No there isn't. However, you can use WIND to force the non-solid elements to go one direction.  To do it, you have to pause the simulation, fill it with E-Hole, select WIND, and press SHIFT+Left Click to create a line of WIND. You can make it blow any direction you want. Once the wind is set, you are free to add any non-solid elements on the wind so they can go in a straight direction. Here's one for reference:

EDIT: I recommend you use a rectangular brush by pressing TAB then SHIFT+Scroll. It will be easier to draw a line of wind

@wisco11 (View Post) One of the strongest, but not invincible, elements are TUNG, SHLD and CRMC (CRMC hardens under pressure).

If you want references, here are these saves:

You may want to deactivate the decorations layer.

@wisco11 (View Post) Could you please explain what you mean by "E-Hole Armor"

@pacmanfan123 (View Post)

 probably armor that uses the e hole stacking feature

Well, I found this:

@wisco11 (View Post)

 Qrtz-Coal-TUNG-TTAN alloying pairs nicely with EHOLE, as well as ribbing.